Disclaimer
All software, programs (including but not limited to drivers), files, documents, manuals, instructions or any other materials (collectively, “Content”) are made available on this site on an 'as is' basis.
Canon Marketing (Philippines) Inc., and its affiliate companies (“Canon”) make no guarantee of any kind with regard to the Content, expressly disclaims all warranties, expressed or implied (including, without limitation, implied warranties of merchantability, fitness for a particular purpose and non-infringement) and shall not be responsible for updating, correcting or supporting the Content.
Refilled ink cartridges create a reset issue for Canon Pixma printers, and there are several ways to move the printer through the problem. For printers in the Pixma MP/MX/MG series, ink cartridge resets require you to reset the printer according to BCH technology. Follow the procedure below to initialize the printer settings. Make sure that the printer is turned on. Press the Setup button. The (Setup) icon and '1' appear on the LCD. Press the + button until 'C' appears on the LCD. Press the Color button or the Black button. All the printer settings are initialized. Canon G2010 problem code 5B00 mean the waste ink counter overflow, you should be reset Canon G2010 Waste Ink Counter (clear Waste Counters). The printer will blink as follow: Orange light – 7 times. JASA RESET ONLINE EPSON dan CANON JARAK JAUH On Line KLIK DISINI WA 04 DAFTAR PRINTER Yang bisa di Reset Online: Canon G1000, G2000, Canon G3000, G4000 Canon MX397, MX457, MX497 Canon MX 377, MX537 Canon ix6550, ix6770, ip7270 Canon MG3570, MG3670, MG4270, Canon MG5570, MG5670 Canon E510, E610 Canon iP2770, MP287, Canon MP258, MP237 Epson L120, L220, L310, Epson. How to Manually Reset Canon Printers Without Using Any Software. STEP 1: Make sure that your printer is turned on. STEP 2: Press the power button (this will turn off/switch off your printer) STEP 3: Once turned off, press on STOP button for two (2) seconds. STEP 4: While holding on to the STOP button, press the power button at the same time for.
Canon reserves all relevant title, ownership and intellectual property rights in the Content. You may download and use the Content solely for your personal, non-commercial use and at your own risks. Canon shall not be held liable for any damages whatsoever in connection with the Content, (including, without limitation, indirect, consequential, exemplary or incidental damages).
You shall not distribute, assign, license, sell, rent, broadcast, transmit, publish or transfer the Content to any other party. You shall also not (and shall not let others) reproduce, modify, reformat, disassemble, decompile or otherwise reverse engineer or create derivative works from the Content, in whole or in part.
You agree not to send or bring the Content out of the country/region where you originally obtained it to other countries/regions without any required authorization of the applicable governments and/or in violation of any laws, restrictions and regulations.
By proceeding to downloading the Content, you agree to be bound by the above as well as all laws and regulations applicable to your download and use of the Content.
- Refilling Ink Tanks
Check the remaining ink level with the ink tank indicator on the front of the printer.If the ink level is near the lower limit line (A), refill the ink tank.
Note
If the function for notifying the remaining ink level (remaining ink level notification function) is enabled, resetting the remaining ink level count is required before refilling ink tanks.
There are two ways to reset the remaining ink level count.
- Resetting the remaining ink level count when a remaining ink error occurs
- Resetting the remaining ink level count when a remaining ink error has not occurred
The error code appears on the LCD when a remaining ink error occurs.
- If print results become faint or white streaks appear despite sufficient ink levels, see Maintenance Procedure.
- For precautionary notes on handling ink bottles, see Notes on ink bottles.
Refilling Procedure
Reset Canon G2010 P07
When you refill ink tanks, follow the steps below.
Important
- Please ensure the printer remains flat after initial setup and is NOT turned upside down or on its side, as ink in the printer may leak.
- If the remaining ink level notification function is enabled, refill all four ink tanks until full.If the remaining ink level count is reset when the ink tanks are not full, the printer cannot detect the ink level correctly.
Tamil mp3 songs 5.1 dolby. Make sure that the power is turned on.
Open the scanning unit / cover (B).
Important
- Do not touch tubes or other parts inside the printer.This can cause trouble with the printer.
Open the ink tank cover.
To refill the black ink tank, open the left ink tank cover (C).
To refill color ink tanks, open the right ink tank cover (D).
Grab and remove the tank cap (E) of the ink tank to be refilled.
Important
- Carefully remove the tank cap of the ink tank.Ink on the inside of the tank cap may spatter when removing it.
Take a new ink bottle out of its package.
Hold the ink bottle upright and twist the bottle cap (F) to remove.
Important
- When removing the bottle cap, avoid squeezing the sides of the ink bottle.Hold the ink bottle as shown in the figure above.If you push the sides of the ink bottle, ink will spatter.
- Do not shake the ink bottle.Ink may spatter when opening the cap.
- Even if the ink bottle is dented, the ink contained in the bottle can still be used without problem.
Refill the ink tank.
Aligning the nozzle of the ink bottle with the bottle guide (G) on the printer, insert the nozzle into the inlet (H).
Next stand the ink bottle upside down and squeeze the sides of the ink bottle to refill the ink tank.
Important
- Make sure that each color of ink tanks is filled with corresponding color of ink bottles.
- When refilling ink tanks, do not squeeze the bottle sides too hard.Ink may spatter.
Do not fill the ink tank above the ink tank'supper limit line (I).Ink above this line may spill over, causing malfunction or damage to the printer, and preventing the printing operation.
- After refilling ink tanks, close the bottle cap of the ink bottle securely.
- Discard empty ink bottles in compliance with local laws and regulations regarding disposal of consumables.
Recap the inlet with the tank cap of the ink tank.
Make sure the tank cap is completely inserted.
Note
- When inserting the tank cap, be careful not to twist the tank cap rubber.
Close the ink tank cover.
Important
- If you cannot properly close the ink tank cover, check if you forgot to insert any tank caps of the ink tanks.
Lift the scanning unit / cover up slightly and then gently close it.
Note
If the error code appears on the LCD, take appropriate action.
- The printer may make noise during operation.
If remaining ink level notification function is enabled
Resetting the remaining ink level count when a remaining ink error occurs
If the remaining ink level notification function is enabled, the icon flashes on the LCD when ink runs low.This function is enabled by default.Refill all four ink tanks until full and then reset the remaining ink level count.
To continue enabling the remaining ink level notification function
Press the Black button or the Color button for more than 5 seconds.
The icon turns off and the remaining ink level count is reset.
To disable the remaining ink level notification function
Press the Black button or the Color button and release it immediately.
The icon turns off and the remaining ink level notification function is disabled.
Resetting the remaining ink level count when a remaining ink error has not occurred
If you refill ink tanks when remaining ink level notification function is enabled and when the remaining ink error has not occurred, refill all four ink tanks until full and then reset the remaining ink level count.
To continue enabling the remaining ink level notification function
Press the Setup button.
The (Setup) icon and '1' appear on the LCD.
Press the + button until '14' appears on the LCD.
Press the Black button or the Color button.
The remaining ink level count is reset.
To disable the remaining ink level notification function
Press the Setup button.
The (Setup) icon and '1' appear on the LCD.
Press the + button until '15' appears on the LCD.
Press the Black button.
The remaining ink level notification function is disabled.
Important
- If the remaining ink level notification function is disabled, visually inspect the remaining ink and refill the ink tanks as necessary.Continuing printing with ink below the lower limit line of an ink tank may prevent satisfactory print quality or may cause malfunction or damage to the printer.
Note
You can also set the remaining ink level notification function or reset the remaining ink level count from your computer.
Notes on ink bottles
Important
- Keep out of reach of children.
- Do not drink ink.
- Be careful not to get any ink in your eyes or in your mouth.(In case of eye contact or swallowing, rinse with water and contact a doctor immediately).
- When you store ink bottles, close bottle caps completely and place bottles in standing position.If the ink bottles are laid down, ink may leak.
- When refilling ink tanks, take sufficient care to prevent ink from spattering onto surroundings.
- Ink may stain clothes or other belongings permanently.Washing may not remove ink stains.
- Do not use ink bottles and ink contained therein except to refill tanks of printers specified by Canon.
- Do not leave ink bottles in areas exposed to high temperature, such as near fire or a heater or in a car.Bottles may warp and cause ink leakage or ink may become poor quality.
- Do not subject ink bottles to impacts.Ink bottles may be damaged or bottle caps may come off by such impact, and ink may leak.
- Do not transfer ink to other containers.This may result in accidental ingestion, inappropriate use, or poor ink quality.
- Do not mix ink with water or other ink.This may damage the printer.
- Refill ink tanks quickly.Do not leave ink tanks with cap off.
- Once an ink bottle has been opened, do not leave it with bottle cap off.Ink will dry out, possibly preventing proper operation of the printer when an ink tank is refilled using this bottle.
Reset Canon G2010 Tanpa Software
Note
Color ink may be consumed even when printing a black-and-white document or when black-and-white printing is specified.Every ink is also consumed in the standard cleaning and deep cleaning of the print head, which may be necessary to maintain the performance of the printer.
When ink runs low, promptly refill it.